How Do You Disassemble A Kenmore Dryer?
To be able to test and replace parts on your Kenmore dryer, you must have access to them. By learning how to disassemble a Kenmore dryer, you can repair your unit quickly. The typical homeowner can disassemble the Kenmore dryer with basic tools in about 30 minutes. Unplug the Kenmore dryer from the wall outlet. If your unit is a gas model, shut off the gas valve as well. Pull the Kenmore dryer away from the wall so that you have access to the rear of the dryer. Use a screwdriver to remove the two screws that secure the front of the control console to the top of the dryer. The screws are located on the end of each side. Pull the rear of the control console toward you to disengage it from the dryer. Attach masking tape to the individual wiring harnesses, and mark them with their locations. Pull the wiring harnesses apart by pressing in on the plastic lock tab and pulling them loose. Set the control console out of the way. Use a screwdriver to remove the three screws on the rear of the to