How Do You Field Strip A Mauser 98 Rifle World War One?
How to field strip a mauser 98 rifle.World War One.Please recommend this article. Step one make sure the rifle is not loaded!!Remove the bolt from the receiver by using the lever on the left side of the receiver.The bolt should slide right out.This will also make the rifle 98 safe because without a bolt the rifle can not fire.Push down on the magazine to make sure there are no blockages. Step two remove the strap band by pressing the latch on the right side of the sling band.Work this band off slowly as to not damage wood.Remove barrel band at the end of the barrel using the same method.This may be more difficult than the strap band because there is more of a tighter fit. Step three there is a screw or bolt at the rear end of the trigger houseing.Remove or losen this screw and the barrel and receiver which are one in the same will come away from the wood stock.In the very front of the trigger houseing in front of the magazine there are two screws or bolts.Losen or remove these and the
