How Do You Fix A Washing Machine To Drain Completely?
A washing machine that won’t drain can be as simple as a small clog or it might be time to call the maytag repair man. Follow these trouble shooting steps to possibly save some dough. Step 1 Check hose for kinks. Straighten hose best as possible or replace. If hose is looping gravity may be the problem. Try cutting off excess. Step 2 Test lid switch for “click”. If you don’t hear this “click” you may try replacing it by ordering a new one from the manufacturer and following installation instructions. Fairly easy job for a do-it-yourselfer. Step 3 Check belts to see if they are loose or broken. Most washers have removable panels that let you get to the pumps, motors and belts. Belts can also be done by a do-it-yourselfer but can get tricky, you may want to seek a friend who has some belt experience. Step 4 Check hose that connects tub and pump. Remove hose with bucket and rags close by, check for obstructions. Step 5 Check pump with voltmeter could be an actuator(a value that controls w