How Do You Fix Old Whirlpool And Kenmore Clothes Dryers?
If you have an old Whirlpool Or Kenmore Dryer that doesn’t work, it can be fixed. You can save a lot of money by fixing it yourself. Otherwise you could get a big repair bill, if someone comes to fix it. You will really save a lot if you don’t buy a new one. And guess what? When you get it running good, it will dry your clothes just as easily, and just as fast, and efficient as many of the new ones. Now, first a safety tip: Be sure the dryer is unplugged from the power before you start working on it! To make it easier to work on, unfasten the vent pipe from the back. This is usually a 4″ aluminum flexible pipe, which carries away the hot air and lint from the dryer when it is working. Now you need to determine what the problem was, or what the dryer wasn’t doing. Did it run okay, but not heat? Was it just blowing cold air and not drying the clothes. There are a few things that can cause this. Remove the metal back from the dryer. It is fastened on with several ΒΌ” or 3/8″ screws. Look a