How Do You Fix The Light Switch On A Maytag Dryer?
The door switch on a Maytag dryer doubles as the dryer light switch. When the door is closed, the door switch closes an electrical circuit so that the dyer will operate. When the door is open, the door and light switch break the circuit and the light in the drum comes on. It is necessary to know how to fix a light switch on a Maytag dryer if you have determined that the bulb is good but you are still not getting the dryer light to turn on. Step 1 Disconnect the power from the Maytag dryer by unplugging it from the wall outlet. If you have a gas dryer, you must turn off the gas supply at the shutoff valve as well. Step 2 Open up the lid to the lint screen. Remove the two screws that are located near the lint screen using a screwdriver. Remove the lint screen from the dryer after removing the screws. Step 3 Insert a putty knife between the front and top panels. Locate the mounting clips about two inches from the corner, and press in with the putty knife to release them. Step 4 Lift up on
