How Do You Install A Ceiling Speaker In A Tile Ceiling?
• Take the tile you wish to place the ceiling speaker in out of the ceiling. • With a pencil and the ceiling speaker on the tile, trace around the speaker completely. • With a hacksaw or jigsaw, cut around the hole you just made in the ceiling tile. • Install the speaker back box to the tile bridge and secure the assembly to the ceiling tile.( Much sound quality is lost if a back box is not used.) • Screw the ceiling speaker’s mounting bracket onto the ceiling tile with the included screws. • Place the ceiling tile back into the ceiling. Attach the tile bridge clips to the ceiling grid. This will keep the ceiling tile from sagging with the weight of the speaker. • Wire the ceiling speaker to the speaker wire and secure them with wire caps. • Put the speaker up onto the mounting bracket and secure it with the included screws. • Place the speaker grille onto the ceiling speaker and secure it with screws if needed, usually included. • Run the speaker wires to the receiver or amplifier. Re