How Do You Install A Trailer Hitch On A Chrysler Town And Country?
This trailer hitch is for the stow and go seating Chrysler town and Country. So let’s get started, just follow the steps below to continue. Get the vehicle up in the air. Jack it up and then support it on jack stands. Find the suspension spring bracket for the rear wheel. You are going to remove the two end bolts and leave the middle one alone. Then there’s a bolt by itself that you have to remove as well. Now you are going to actually install the hitch. Hold the hitch up to the vehicle and install the mounting bolts. Don’t worry to torque the bolts down yet. Make sure the hitch is lined up in the center and then torque down the bolts. That’s about it, you are done. This is only a guide. Be sure to read all instructions that came with the trailer hitch. So go and test out your new trailer hitch.