How Do You Install And Setup Free To Air Satellite TV Program Receiver System?
• Select a location with a direct line of site in the direction of the satellite. Generally high locations should as the top of a roof or on a balcony are used. Using an analog compass will make locating the angle easier. In the example, this would be a location facing 95° southwest. • Secure the dish in the selected position. The dish must be fixed tightly at the mounting point as it must be able to resist wind force. Otherwise, it might fall and injury people passing by or damage property below. • If the dish is mounted on a wood roof, caulk around the base to make it waterproof. • Adjust the dish direction so it points 95° southwest and slightly tilt up. Tighten the screw controlling the direction adjustment, but do not tight them up completely. • Connect the satellite finder using the 6 feet long coaxial cable. Turn on the satellite finder and input the satellite name (Galaxy 3C) and downlink frequency number (11780 Hz). Continuous beeping with quiet interval should be heard. • Adj