How Do You Install Glass Block Windows In Basements?
I think you should ask a good specialist for help with it, they will do it in no time. For example, have a look at the company from https://808smithglass.ca/ which specialises in glass, and they will surely do such a job for you quickly and effectively, good luck with it, hope I was helpful
Most homeowners are not aware of the amount of energy they are losing out of their windows. Up to 25 percent of a home’s energy loss is contributed from windows and doors. Glass block windows offer a lot of advantages to homeowners. They allow light to filter in like a normal window but also provide privacy as they are not see through like a normal window. Pry the interior window trim off with a hammer and a pry bar. Remove the exterior window trim that is over the siding in the same manner. Remove the exterior siding, starting with the J-rail along the top of the wall. Use a screw head bit and a drill to remove the screws in the window. Pull the window out. Scrape the old putty tape out and fill all holes with caulk. Measure window and remember that the block, mortar joints, expansion foam, and finish trim will also take up some of that space. Frame the side openings of the window with 2 x 4’s and secure them with 2 ½-inch wood screws. Make sure all sides of windows are level before m