How Do You Install Harley Exhaust Gaskets?
Harley-Davidson exhaust gaskets are one-time use components. Made from aluminum thread that is woven into a mesh, the gaskets deform upon compression by the exhaust pipe and flange. Round in shape but triangular in cross-section, the outer peak of the triangle receives the pipe end and seals against it as the gasket is crushed. Loosen the exhaust flange nuts and spin them off their studs. Remove the nuts from the T-bolts holding the rear part of the exhaust pipe/muffler assembly and slide the T-bolts from their rubber-mounted bracket. Lower the pipes away from the engine and frame. Remove the old gaskets from the exhaust ports in the engine heads. Reach into the port and hook the old gasket with the dental pick. Pull the old gaskets out and inspect the ports for any lingering bits that may be stuck. Insert the new gaskets with the flat side up against the inner port shoulder and the tapered edge facing away from the heads. Hold the pipe in position and start the exhaust flange nuts ont
