How do you install the belt on the kirby vacuum?
Step 1: UNPLUG YOUR KIRBY VACUUM CLEANER. Before you go any further, take your time with this belt change. It’s not that difficult, just a little different than most other vacuums. These belts are very easy to find on the internet. Step 2: You should be facing the front of your Kirby vacuum. The height adjustment lever will be on your right. Push the lever all the way down. Lift the light hood with your left hand. Turn theKirby vacuum belt lifter counter-clockwise with your right hand. Unlock the accessory lock. The accessory lock is located under the light hood. Move the lock to the left to disengage it. Remove the front of the vacuum cleaner. Step 3: Turn the vacuum belt lifter all the way clockwise until the belt drops down. Unlock the roller plate by releasing the two latches on the rear. Pull the roller plate up slightly and then off. Step 4: Bend one end of the roller bracket just enough to remove the roller. Remove this end of the roller. If you need to replace the roller take i
