How Do You Install Under Cabinet Microwave?
Most microwaes come with good instructions and templates. This makes the installation pretty easy. You might need a little help holding things if you never attempted this before. Remove microwae and mounting bracket from box. Center microwave bracket in hole above stove. Push bracket up to upper cabinet bottom and mark desired holes. Try to hit studs otherwise you must drill bigger holes and use toggle bolts. Mount bracket to wall. Take cabinet template out and fold on lines that are required. If cabinet back is one half inch fold on that line same with sides. Fold on line in accordance with thickness of cabinet sides and back. Tape in place and mark all holes to be drilled. Drill holes with recommended size bit. Pull power cord through hole for it and lift microwave hooking it into the back mounting bracket. tilt front up. Install the front bolts through cabinet and into microwave. Tighten all bolts. If you are hooking up exterior venting remove plate and hook up duct work. Remove all