How Do You Integrate Doors Into An Alarm System To Open?
It is possible to use the transmitter of your alarm system not only to unlock the doors but to pop them open as well. Check the remote of your alarm system as well as the alarm. Does the transmitter include door lock/unlock keyless entry or buttons to control auxiliary features? If so, you can proceed with the project. You want two buttons to pop two doors. If your car has four doors, you want four buttons — one for each door. Gather the following tools and materials: solenoids for each door, screws, screwdrivers, drill, wire crimps, stripper, 12 gauge electrical wire, door panel popper, 1-inch to 1-1/2-inch heavy duty coil springs. Read the instructions that come with the solenoid and your alarm. Pop the door panel off the door. Find a location for the solenoid inside the door. You want to mount the solenoid securely to metal. Locate it as close to the door opening mechanism as possible because you will be looping a cable from the solenoid to the opening mechanism. Make certain that
