How Do You Make A Teapot Spout In Pottery?
Teapot spouts are distinctive pieces of pottery that are not quite cylinders or cones. The crafting of the spout and its positioning is essential to the functionality of your teapot. Take care in throwing this small piece of pottery and attaching it to its vessel. Step 1 Center a small ball of clay onto the wheel. The size of the clay will depend on the size of your spout and you may have to experiment to get it right. Step 2 Pick a length for the spout and begin pulling up the clay as the wheel is spinning. Don’t make the spout too short, as this will interfere with the functionality of your teapot. Step 3 Leave the bottom of the spout open. Shape the clay like a funnel, with the bottom being much wider than the top. Step 4 Bend the clay to create the curve of a spout once you have the desired height. If you have uneven clay, trim it and smooth any rough edges. Step 5 Remove the spout from the wheel with a string. Test your spout against the teapot for fit and make sure it isn’t too l