How Do You Make An Impossible Bottle?
Impossible bottles are, quite literally, the unbelievable result of dedicated focus, patience, a steady hand and a great deal of lateral thinking. This article will show you how to place certain items into an “impossible bottle”. • Remove the plastic wrapper and toss. • Remove the cards. • Heat the sticker with a blow dryer. It will come off easily without tearing. • Using a blow dryer again, or using a sharp hobby knife, slice open the bottom seam of the box so that it can be flattened. • Insert flattened and rolled up box into the bottle and unflatten. Using a bent piece of wire or other appropriate tool, reseal the bottom seam with glue. Strong glue dries too fast to allow you to get it in the right place, so use some craft glue and be patient. • Insert one card at a time. Close the box and heat the sticker to make it sticky so it can reattach. Use some more glue if it doesn’t get sticky enough. • Puncture the ball in the fuzzy area (part the fuzz so that the hole doesn’t rip out to