How Do You Program Factory Honda Acura Remote Key Fobs?
• Gather all remotes for the vehicle on hand. You only need one remote to get into program mode but all remotes must be programmed during the same session. The car will “forget” previous remotes everytime it is reprogrammed. • Sit in the car with all doors/trunk tightly closed. • Turn the key to the ON position, marked by “II” on the ignition bezel so the dash lights come on. • Listen for a quiet click, and then within 5 seconds press the “Lock” button on the remote for 1 second. • Turn the key to the OFF position, marked by “I” on the ignition bezel so the dash lights go off. If you hear a quiet click in the dashboard after turning switch to “I” then the entire process must be restarted. • Repeat three more times (for a total of 4 times). • Upon the 4th turning of the key to “ON”, press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn
