How Do You Program Genie Garage Door Opener Remotes?
Programming Genie garage door remotes will depend upon the model and age of your garage door opener. Most newer models use a smart button to program the remotes. Older garage door openers have a line of white switches that must match. Look at the back of your garage door opener head to see which type of programming system your opener uses. Purchase remotes from home improvement centers or garage door dealers. Place a stepladder under the Genie garage door opener power head and locate the dip switches on the back of the power head. Nine switches in a row are set to different settings. Write the setting of each dip switch on a piece of paper. Remove the battery cover from the remote control. Some remotes have a door on the back that you can slide off with your thumb. Other remotes require you take the back of the remote completely off. Insert a dime in the small slot at the bottom of the remote and twist the dime to pop the back off the remote. Locate the line of dip switches directly ab