How Do You Put A Sliding Door Inside Of A Wall?
Check the opening, start by plumbing and securing the hinge side, shim the top and latch legs, don’t worry about plumb and level of the top and latch legs as much as having equal reveals, nail it in place, cut the shims off flush with the drywall, trim it. wash, rinse & repeat. It is not so simple, I recommend to contact professionals. By the way if you will have some issues with sliding doors I can recommend this company https://24hr-sliding-door-repair.com/contact-us/ they can solve almost any problem.
An ordinary swinging door 30 inches wide needs an open area that could be put to better use in small spaces such as powder rooms, closets, and laundry rooms. A sliding pocket door, which disappears into a pocket inside the wall instead of swinging, can be just the space-saver needed to make a room feel larger or less cluttered. Converting a standard door to a pocket door requires planning and some skill. Fortunately, several manufacturers offer pocket-door kits that simplify installation. Evaluate the existing door configuration. Measure the door width, and check the wall on both sides of the existing door. The rough opening for a pocket door requires a few inches more than double the width of the existing door. The space must be free of plumbing and electrical wiring. Consider moving the opening to one side or using a narrower opening if there are obstructions within the wall. Buy a pocket door kit sized for the height and width of the opening and wall thickness. Read and follow the k