How Do You Removal Dash Cluster 1984?
Dash Procedure (Dash Cluster 1984 – 1989 Corvette) Please read all instructions before proceeding 1. Disconnect negative battery cable. 2. Use small flat blade screw driver to push in retainer flange on back side of headlight switch knob and pull knob off. 3. Remove upper dash pad. There are screws under the overhang and 2 screws in the defrost duct. Carefully pull rearward to release tabs. Pull passenger side corner rearward and slide dash through passenger door window. 4. Remove screws from dash bezel. 5. Lower (tilt) steering wheel to lowest position and remove tilt lever by unscrewing counterclockwise. 6. Carefully remove bezel. 7. Remove (4) 7mm screw and holding cluster to support. 8. Place clean soft rag across steering column. Pull left side of cluster toward you slightly and lift. Pull from behind center cluster bezel. Lay cluster face down on rag and using flat head screw driver release locking tabs on dash electrical connectors(2). Carefully pull connectors out of socket. Ca