How do you remove a ignition lock cylinder from a 1996 chevy blazer?
Start by disconnecting the yellow wire under the dash for the airbag. Now turn the steering wheel 90 degrees to access the underside of the steering wheel. You will have to insert a smaller size flat blade screw driver into the 4 holes on the back of the steering wheel and rotate them to release the airbag. Now remove the nut holding the steering wheel on and remove the steering wheel. BE VERY CAREFUL WITH THE AIRBAG MODULE!! Now remove the lower column cover with 2 Torx screws. You will now have access to 2 inverted Torx screws that hold the top column cover in place. Look on the top of the ignition cylinder housing and find the small hole. Insert a small Allen wrench into the hole and turn the key to “run” position and the ignition cylinder will come out. Hope this helps.