How Do You Remove A Moen Shower Diverter?
A Moen shower diverter valve operates to direct the flow of water to either the tub’s spout or to the showerhead. The diverter valve is the middle of the three handles which attach to the wall, and uses a compression stem and a single washer. The failure of a diverter valve to properly seal the water’s passageway can typically be traced to a defective washer. Thankfully, removing a defective diverter valve takes only a few minutes and Moen’s replacement valves are commonly found at most home improvement stores. Step 1 Turn off the water supply at the main shutoff valve near the water meter. Step 2 Remove the handle which actuates the diverter valve by first withdrawing the single screw located in the center of the handle with a Phillips screwdriver, then by pulling the handle away from the diverter valve. Step 3 Pry the chrome escutcheon plate off of the shower’s wall with the blade of a flathead screwdriver. Step 4 Remove the bonnet nut from the diverter valve. The bonnet nut is what