How Do You Remove & Replace The Front Cover Of A Maytag Washing Machine?
Your Maytag washing machine is a surprisingly simple appliance and it is relatively easy for even a novice do-it-yourselfer to make a wide range of repairs. In order to get to many parts of your washing machine you will first need to remove the front panel. All it takes to remove the panel is one simple tool. Unplug your machine before you begin any job to prevent the possibility of electrical shock. Grasp the front edge of the top of your machine and simply lift up. No tools are required. The top is hinged at the back and will lift up like a clam shell. Lift all the way up and rest the lid on the wall behind the machine. Locate the two Phillips screws on the top inside edge of the front panel. There is one screw at each corner of the top of the front panel on the inside of the machine. Remove these screws and keep them safe. Tip the front panel toward you just a little and then wiggle it slightly and lift up. The panel will pull up until it clears to J-shaped clips near the bottom of