How Do You Remove Scratches On Car Window Tint?
Car window tint film can scratch easily, and repair of the scratch will require partial removal of the film. Most window tint film has two layers, and even if the scratch only penetrates the top layer, the entire section containing the scratch must be replaced for a professional appearance. The average backyard tinter can finish the repair in about 30 minutes. Cut into the tint around the scratch with the razor blade, penetrating both layers of the film and creating a section that can be removed. Deep, precise cuts will separate the film into sections. Spray the section with a liberal amount of distilled water, using the spray bottle. Don’t use ammonia-based cleaners, as they will dissolve the glue. The area should be saturated but not dripping wet. Daub any excess with the towel. Work the razor blade underneath the lower layer of tint film at one corner, starting at the edge. Spray more water if the tint film begins to dry. Continue to lift the film with the edge of the razor blade un