How do you remove the radio in a 2003 Pontiac Montana?
You first have to remove two screws(7mm)in the back of the storage compartment under the pull out cup holder. Once they are removed pull that compartment out and set it off to the passenger floor side being careful not to break your lighter plug wire. Next you pull out your cup holder and remove two screws up under where the cup holder slides in and out also 7mm. Then while cup holder is pulled out remove two screws one on each side of the cup holder which are back in a little holes phillips head. After all 6 screws are out using a small flat head screwdriver very carefully pry loose the three tabs which hold the top of the plastic trim ring above the radio.