How Do You Remove Vauxhall Corsa Rear Bumper?
You’ll need a T20 torx screwdriver and a 1/4 10mm socket + ratchet. 1) Where the black mouldings go over the both rear arches, in the arch are 2x 10mm plastic nuts on each side (note:may be covered with dirt), remove those 2) Underneath the fog light and the reflector on the bumper are 2 torx screws (1 each side). remove them. 3) Open bootlid there are 4x torx screws on the bumper by the seal. Remove those. 4) Bumper can now be removed but watch the wiring going to the number plate bulbs and fog light, they just twist out. 5) Fog light can now be removed by removing 3x torx screws.