How Do You Remove Water Filter From A Kenmore Washing Machine?
When the Kenmore washer seems to be taking a long time to fill, you may have to replace the water inlet valve. Remove the water filter from the machine to inspect, test or replace it if necessary. The water filter is also known as a water inlet valve. The water supply passes through screens that filter the sediment. When the valves become clogged and cannot be cleaned, the water inlet valve should be replaced. Unplug the Kenmore washing machine from the wall outlet, and turn the water supply off to the washer. The water shutoff valves are located where the water spigots come out of the wall. Pull the Kenmore washing machine away from the wall to access the back of it. Place a bucket directly under the area where the water hoses connect to the rear of the washer. Turn the hose connections counterclockwise, and remove the hoses from the washer. Set the loose ends of the hoses inside the bucket to catch any water left in them. Use a screwdriver to remove the screws that secure the front o
