How Do You Repair The Monofilament Wire On Glasses?
There is nothing as irritating as getting a nice pair of new glasses only to have them fall apart after a simple drop! Now this article is written knowing that there are several designs of rimless glasses on the market and I cannot accurately tell one how to fix theirs without knowing the exact model. Look this one over and then if it is not the right model, there is a link at the end of the article for more information. Remove the broken wire by carefully unscrewing the side screws that anchor the wire in place. Now measure the piece of wire or pieces of wire. (Presumably it has broken which is why you are reading this article.) Now take the measurement to your local craft store such as Michaels or AC Moore and purchase the needed amount plus one inch for extra. The diameter of the wire should be around 0.5 mm. Now if you study the drawing here you can see how the two side anchors come apart with screws. Open them up and then unscrew the tiny tension screws on the side. Now wrap the w