How do you replace left front door handle on 2001 kia sephia?
First roll the window down. Then take the door panel off of the inside of the door. There should be two or three screws along the bottom of the panel, and one in the grip. You’ll also need to remove the window crank if you don’t have power windows. Now, once you have all the screws out and the crank off, pull straight up on the door panel, because there are clips at window sill that hold the top of the panel on. When you have the panel completely off, there should be a piece of plastic glued over the inside of the door. That’s a moisture barrier. Roll the window back up. Pull the top left of the barrier far enough down to fit your hand up to the handle. There are two nuts on each side of the top of the handle. Remove these. also, you’ll need to remove the lock rod and latch rod. there are plastic clips that hold these on. Unclip them from the rod and rotate the clips, and the rod should slide out. Then pull the bottom of the outside of the door handle out, and slide it down a little to
