How do you replace the headlight bulb located on a Ford Windstar?
For model years 1999-2003, and most likely the entire Freestar line too: NOTE: This procedure is detailed & illustrated in the Owner’s Manual that came with the car, approximately page 246. The entire headlamp acutally sits inside of a mounting bracket – this means it is very easy to fully release, and remove the headlamp to make bulb replacement much less *painful*! There are 2 headlight retainer clips to find – they are: 1) black, upside-down L-shaped metal clips about 1/2 inch wide 2) located just behind the top edge of the headlamp glass, inside the engine compartment. Release and pull the clips upward. The headlamp assembly will now pull forward providing great access to the electrical connector and bulb retainer ring. Picking up the *removal* instructions from the manual: 3. Pull headlamp assembly forward disengaging the lamp from the rear retainer to expose the back of the bulb. 4. Disconnect the electrical connector from the bulb by pulling rearward. 5. Remove the bulb retainin