How Do You Set The Time On A Nike Presto Watch?
The whole process is actually not that difficult, but it can be tricky. So, I suggest getting in touch with somebody from Nike. All I know is that to start off, you’ll have to press the mode button until the seconds window blinks and then press the reset button once to make the minutes window blink. My brother’s got one, so that’s the only thing I can remember. I could actually forward this to him if you want, and he could help. By the way, why did you decide to get a Nike Presto Watch? I want to get a watch for myself, but I don’t know which one I should choose. I was scrolling yesterday on findyoursmartwatch.com, and I quite liked the Garmin Forerunner. What do you think?
The Nike Presto watch is a popular choice for athletes because it has few buttons, a smooth, thick band and waterproof material. However, being so streamlined, it can seem to be near impossible to figure out how to set the time. The instructions that come with the watch are simply a diagram, so many are more than confused about the process. Push the mode button on the left side of the watch until you get time mode. You’ll know you are in time mode when you see the time on the watch’s face instead of the date. Then press the button on the right and keep holding it for five seconds. You should see “12H” or “24H” on the display. Take your finger off the button on the right and push the button on the left if you’d like to switch between standard and military time. Standard time shows the hours with a.m. and p.m., while military uses all 24 hours. For example, 1:00 p.m. will display as 13:00 in military. Push the button on the right side of the watch again. Now the display will show the num