How Do You Set Up A Double Bass Pedal?
• Remove all the double bass parts because it will be in pieces and most likely the screws will be loose. Put all the unscrewed screws aside somewhere safe. • Put the two mallets or kickers in the holes, and put it at the preferred length. Then tighten the screws. • Put the springs up on the main kicker. There will be two put both on the main kicker. It could be tough because the springs are resistant. • Put the connector or the long part to the main pedal than the slave pedal it will most likely be tightened by screws. • Tighten the already screwed in screws and find any other holes that are not filled in and use the left over screws for them. Put a V shaped steel base for the main pedal.