How Do You Start A Weed Eater Gas Trimmer With A Warm Engine?
Weed Eater brand gas trimmers have become a staple for home lawn and garden maintenance. Gas trimmers are lightweight, inexpensive and versatile. They can be used for a variety of tasks including trimming, mowing, scalping, sweeping and edging your lawn and flowerbeds. But before you can trim your lawn with it you have to be able to start it. Starting a warm engine requires a slightly different procedure than starting the engine when it is cold. Put on a pair of safety glasses or goggles. Place the Weed Eater gas trimmer on its side on the ground with the fuel cap facing up. Remove the fuel cap by twisting it counter-clockwise until it is free of its threads. Set the fuel cap aside. Fill the fuel reservoir with the properly mixed fuel. Wipe up any spills with a rag or paper towels. Replace the fuel cap by twisting it clockwise until it is fully seated and tight. Dispose of the rag in an approved container. Move the gas trimmer at least 10 feet away from the fueling site. Set the engine