How do you switch from NTSC to PAL and visa versa ?
The DVD-2000 can support 5 video modes with auto disc format sensing capabilities. The following are the supported video formats: NTSC, PAL, PAL 60, PAL M. NOTE: If your monitor supports NTSC/PAL auto-switchable, we can setup at “AUTO” mode, then both the NTSC and PAL DVD can be played normally. The following are instructions to setup the desired video output mode: 1) Power the player with no disc inserted OR you may have the unit’s tray “OPEN”. 2) Select the “SETUP” button on the remote controller, it will display the following “Language”, “Video”, Audio” “More Aud’, “Parental” modes. 3) Press the “RIGHT” button from the directional keypad, select “Video” mode and press “Enter”. 4) Select the “DOWN” arrow button to select the “TV system” mode and press “Enter”. This will display m modes of “NTSC”, “PAL”, “PAL 60”, “PAL M”, or “AUTO”, for selection. 5) Press the “UP” or “DOWN” arrow button to make your selections followed by the “Enter” button to confirm your selection. 6) To confirm y