How Do You Thread An Antique Kenmore Sewing Machine?
With regular maintenance and care, an antique Kenmore sewing machine can run well for years, allowing you lots of relaxing sewing time–as long as you know how to thread it. Here’s a quick run-down on the fairly easy task. Put an empty bobbin onto the bobbin winder post, typically located near the hand wheel on the top or front of the vintage sewing machine. Place the spool of thread on the lower spool pin for a front mounted winder and on the top spool pin for a top mounted bobbin winder. Wrap the thread over the bobbin thread guide and around the bobbin. Loosen the inner wheel on the hand wheel and run the machine by stepping on the presser foot to wind the bobbin. Situate the bobbin into the bobbin case, threading the thread through the guide in the case. Then place the case into the side mounted bobbin assembly on your machine. Place a spool of thread onto the upper spool pin. Allow the thread to come off the back side of the spool. Pass the thread through the thread guide position