How Do You Troubleshoot A Vacuum Cleaner?
When your vacuum cleaner can’t achieve proper suction, the solution is generally easy.
- Empty the bag or chamber. …
- Your height setting might be wrong. …
- Check the filters. …
- Check your hose. …
- Check your brush roll. …
If your brush roll is clean, but still isn’t spinning, you probably have a belt problem.
Also, you can read these tips for maintenance of kitchen appliances
When your vacuum sucks ‘ or doesn’t, as the case may be ‘ try these things before you shell out money for repairs. Step 1 Suspect a tripped breaker, broken on/off switch, or a damaged cord if the motor won’t run. Step 2 Insure that you aren’t running too many appliances on the circuit if the breaker continues tripping. If that’s not the problem, you may have a short circuit in the power cord. Replace it immediately to avoid fire hazards. Step 3 Check to make sure the bag isn’t full if you aren’t getting much suction. Replace the bag if it’s full. Step 4 Make sure the hose is properly connected to the machine and that there are no obstructions in the hose or fan. Step 5 Repair a cracked hose with duct tape. Prevent creased hoses by hanging them over two pegs on a closet wall. Step 6 Remove hair and strings that tend to get wrapped around the vacuum brush with a pair of small scissors.