How Do You Use A Battery-Powered Air Compressor To Pump A Tire?
Many auto repair kits contain battery-powered air compressors, which can be used to pump up a tire when it goes flat. They are simple to use and don’t require much dexterity, though they may pose difficulties if you’re not mechanically inclined. Jack the tire up so that it is off the ground and not supporting the weight of the car. It will make the process go faster and allow the battery-powered air compressor to do its job without any undue strain. Remove the plastic valve cover from the tire you want to pump up. It is usually very small, so you should put it in your pocket or a similar safe place lest you lose track of it. Push the valve from the air compressor onto the tire valve. It should slip firmly into place over the threaded tip of the valve. Push down the thumb latch on the compressor’s valve to complete the seal and allow the air to go into the tire. Turn the pressure gauge knob on the air compressor until it reaches the appropriate pressure for your tire. You can find the r