How Do You Use A Slide Projector?
Using a slide projector is easy, if you know the basics. Here they are. Gather the slides you are going to use. Most slide projectors have a carousel that can hold approximately 80 slides. If you have more than 80 slides, you will have to split them into groups. Place each slide into the carousel one by one. Some slide projectors have a clamping system in which you have to release a clamp before you can load the slides. Press the power button, which is usually red and located somewhere along the top panel of the projector. Focus the first slide. Depending on your slide projector, the focusing will either be done automatically, or you will have to adjust it using the focus buttons. Move through the slides using the advance and reverse buttons. Pressing the advance button will make the projector progress to the next slide. Pressing the reverse button will make the projector backup to the previous slide. Press the power button when you are finished. Remove the slides if you are not going
