How Do You Use A Yudu Screen Printing Machine?
• Take everything out of the box. Read the diagram explaining what all the parts are. • There are two sides to the screen: a finished side and an unfinished side. Turn the screen over so that the unfinished side is facing up. • Fill a spray bottle with water (no bleach or chemicals) and spray the screen until it is wet but not dripping. • The black envelope that comes in the box has two emulsion sheets in it. Get one out and place the side that is DULL on the wet screen. • Put the newly emulsioned screen in the drying rack and press the fan button. Make sure you time it as the machine does not beep! It usually takes about 20 minutes or longer. • Print your design on the translucent paper (you can buy designs too). • Now take your screen out and peel off the plastic on the emulsion. If the plastic isn’t coming off, put your screen back in the drying rack for another 10 minutes or so. A little bit of emulsion is usually going to come off in the corner. When it does just be careful aroud
