How Do You Weave Vines Into Bird Houses?
Vines are decorative accents that add interest to a chosen area of the home or garden. Vines are used in craft projects where a natural look is desired. Arranging a vine into an element can be done with a small amount of preparation and practice. Vines are purchased in bundles or by the yard. The vines are typically divided by diameter, but some size variation will occur on the same piece. Select thinner vines for weaving through birdhouses. Don gloves. Grasp the sharp utility knife firmly and position the edge at a 45-degree angle to a long piece of vine. Run the edge of the knife down the length of the vine. Press firmly but not hard to ensure only the green skin is removed. Lay the vine on a flat surface outside for seven days. Place the vine in full sunlight. Test the vine for dryness. The vine is ready when it is hard to the touch. If the vine is not hard after seven days, leave it to sun longer. Place the dried vine in a tub filled with lukewarm water for two hours. This will mak