How does the Forskin Natural Restorer work?
The Forskin Natural Restorer consists of a stainless steel bell that fits over the glans or head of the penis. A stainless tube with a steel slider screws into the bell. The steel slider has a small thumb screw which can be tightened or loosened. The objective is to pull the remaining penile skin over the steel bell and onto the slider. At this point, medical tape is gently wrapped around the skin and the steel slider. Taping skin to the slider prevents the device from disconnecting from the developing foreskin. After the skin is secured to the slider you may loosen the thumbscrew and move the slider along the tube until the desired tension is reached. If you have very little loose skin you may choose not to use any tension at first. The device is hollow, which allows for urination without removing the tape. Until you become familiar with the device, care must be exercised so that too much tension is not applied. If too much tension is applied you will notice a burning sensation and th