How does the Photogenic Infrared remote control system work?
This wireless system allows you to change your power settings on Solair and your DR model PowerLights, even if they are thirty feet away. Attach an IR receiver to the phone jack on each of your lights. Next assign a different unit number to each light. Use the IR remote control transmitter to set the flash and modeling light power levels on each light individually. Or, you can assign the same unit number to all your lights to raise and lower the power levels simultaneously. The bright LCD display of the receiver shows you the exact flash and modeling light power levels you have set on each light. Once the power levels are set, trigger the lights with a sync cord or radio triggering device. By adding the PLCPTR-2 Studio control kit, you can manage all your flash and modeling light power settings through your personal computer. You can save an infinite number of lighting set ups on the hard drive. Choose the set up you want, and with the touch of a key, the flash and modeling light power