Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

how to remove wax dye stain from white wood?

0
10 Posted

how to remove wax dye stain from white wood?

0
10

Wax and gum usually come off easily, but they must be removed carefully to prevent damage to the finish. To make the wax or gum brittle, press it with a packet of ice wrapped in a towel or paper towel. Let the deposit harden; then lift it off with your thumbnail. The hardened wax or gum should pop off the surface with very little pressure. If necessary, repeat the ice application. Do not scrape the deposit off, or you’ll scratch the finish. When the wax or gum is completely removed, buff the area very lightly along the grain of the wood with No. 0000 steel wool moistened with mineral spirits. Then wax and polish the entire surface. If you must remove the entire thickness of the finish, or if the damage extends into the wood under the finish, you’ll find yourself involved in spot refinishing — an unpredictable technique, and not always a successful one, especially where staining is necessary. Sources:

-->
0

Wax and gum usually come off easily, but they must be removed carefully to prevent damage to the finish. To make the wax or gum brittle, press it with a packet of ice wrapped in a towel or paper towel. Let the deposit harden; then lift it off with your thumbnail. The hardened wax or gum should pop off the surface with very little pressure. If necessary, repeat the ice application. Do not scrape the deposit off, or you’ll scratch the finish. When the wax or gum is completely removed, buff the area very lightly along the grain of the wood with No. 0000 steel wool moistened with mineral spirits. Then wax and polish the entire surface. If you must remove the entire thickness of the finish, or if the damage extends into the wood under the finish, you’ll find yourself involved in spot refinishing — an unpredictable technique, and not always a successful one, especially where staining is necessary.

Related Questions

Thanksgiving questions

*Sadly, we had to bring back ads too. Hopefully more targeted.