How to Set Up Auto Turning ?
When setting up the turning tray with the rollers, make sure that the rollers are at right angles to each other. Simply count the number of spaces between rollers so each end of the rollers is the same number of slots apart from each other. The desired distance between rollers is dependant on the size of egg you are incubating. The egg should sit on the rollers with the bottom of the egg not touching the turning tray. To minimise ‘egg creep’ along the rollers it is best to alternate each egg so the top of one egg faces the front of the incubator and the next the back and so on. When placing the turning tray into the incubator make sure that the brass rod on the turning tray enters into the fork on the turning arm. The auto turning will only work when the switch on the control panel is turned on and it lights up. To set the frequency and length of turn the timing clock on the side of the incubator will have to be set. The 24-hour time clock has I digit per 15 minutes around the out side
