Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

I cannot get my Huntron Robotic Prober to work. What is the problem?

April 26, 2017huntron prober problem Robotic

0

Posted

I cannot get my Huntron Robotic Prober to work. What is the problem?

1 Answer

0

Posted

There can be several reasons why this can happen. – For Access USB Probers, make sure the motor control driver is installed by looking in the Windows Device Manager for the HS20USB device. Make note of the COM port assigned to this device so you can select the correct COM port in the Tools/Options/Hardware settings in Huntron Workstation. Probers with serial COM connections (9 pin connection): – Make sure the COM port selection in the Prober Hardware Settings is correct. If you are not sure, try each one (COM1, COM2, etc ). – Make sure the cable is good. A 9-pin serial cable is used. More: – Make sure the STOP button on the Prober is not being inadvertently held down by some object. – Check the COM port settings in the Windows Device Manager and ensure there are no conflicts.