I have an embedded device without a VGA outlet and the keyboard connector and only have a RS232 serial interface. Can I get a text console for ZeroShell?
Yes, you can have a serial console. To the RS232 port connect a VT100 text terminal or a PC with a terminal emulator configured to 38400bps, 8bit, no parity and 1 stop bit. • Having incorrectly configured the firewall or the network in general I can no longer connect via the web interface. Even rebooting the system doesn’t work. How can I resolve the problem? From the ZeroShell console press the Z key. This enables the system to start the Fail-Safe procedure: you will be requested to select an Ethernet interface which can be attributed an IP address of your choice; any obstacles, such as firewall rules, belonging to a bridge, static routes or other will be removed. Once complete, you can access the interface via the IP address you attributed. To exit the Fail-Safe mode you must reboot, having removed the obstacle that blocked access. • Once booted, a text commands menu appears on the ZeroShell console. But how can I start the graphic server? How can I start the graphic application, for
Related Questions
- Are there any PC card that provides a serial port interface, NOT a modem, just the serial port and connector ?
- Is it possible to transmit the measurement signals through the serial interface (RS232) to a computer?
- How do I upload data from my gauge to a PC via the RS232 interface (i.e. the serial port)?