Im having trouble starting my gas powered scooter. What is the best way to start it?
It is important to follow these steps to start the scooter, especially for the first time. Also, the first two or three times you start the scooter, it may take 10-20 pulls on the pull start to get it going. It is strongly recommended to follow all the instructions about the break-in period to promote engine reliability and long engine life. Fill the tank with the proper fuel mixture. DO NOT use straight GAS! You must use a premium 2-cycle oil mixed with the unleaded gas. The ratio of gas to oil is 32:1 for the Razorbacks and all other scooters. The ratio of gas to oil is 25:1 for the Pocket Bikes and after a five full tanks of gas, use a ratio of 50:1 (pocket bikes only!!). During the break-in period do not run the engine at maximum RPM and do not allow the engine to overheat. Check your scooter for loose bolts and nuts before attempting to ride it each day. The vibration from the motor can cause loose bolts and nuts. Press the bulb located on the bottom of the carburetor (right behin
