Is DVD-Video a worldwide standard? Does it work with NTSC, PAL, and SECAM?
DVD has the same NTSC vs. PAL problem as videotape and laserdisc. The MPEG video on DVD is stored in digital format, but it’s formatted for one of two mutually incompatible television systems: 525/60 (NTSC) or 625/50 (PAL/SECAM). There are three differences between discs intended for playback on different systems: picture size and pixel aspect ratio (720×480 vs. 720×576), display frame rate (29.97 vs. 25), and surround audio (Dolby Digital vs. MPEG). (See 3.4 and 3.6 for details.) Video from film is usually encoded at 24 frames/sec but is preformatted for one of the two display rates. Movies formatted for PAL display are usually sped up by 4%, so the audio must be adjusted accordingly before being encoded. All PAL DVD players can play Dolby Digital audio tracks, but not all NTSC players can play MPEG audio tracks. PAL and SECAM share the same scanning format, so discs are the same for both systems.
DVD-V has the same NTSC vs. PAL problem as videotape and laserdisc. The MPEG video on DVD is stored in digital format, but it’s formatted for one of two mutually incompatible television systems: 525/60 (NTSC) or 625/50 (PAL/SECAM). There are three differences between discs intended for playback on different systems: picture size and pixel aspect ratio (720×480 vs. 720×576), display frame rate (29.97 vs. 25), and surround audio (Dolby Digital vs. MPEG). (See 3.4 and 3.6 for details.) Video from film is usually stored at 24 frames/sec but is preformatted for one of the two display rates. Movies formatted for PAL display are usually sped up by 4%, so the audio must be adjusted accordingly before being encoded. All PAL DVD players can play Dolby Digital audio tracks, but no NTSC players can play MPEG audio tracks. Some players will only play NTSC discs, some players will only play PAL discs, and some will play both. All DVD players sold in PAL countries play both.
DVD-V has the same NTSC vs. PAL problem as videotape and laserdisc. The MPEG video on DVD is stored in digital format, but it’s formatted for one of two mutually incompatible television systems: 525/60 (NTSC) or 625/50 (PAL/SECAM). There are three differences between discs intended for playback on different systems: picture size and pixel aspect ratio (720×480 vs. 720×576), display frame rate (29.97 vs 25), and surround audio (Dolby Digital vs. MPEG). (See 3.4 and 3.6 for details.) Video from film is usually stored at 24 frames/sec but is preformatted for one of the two display rates. Movies formatted for PAL display are usually sped up by 4%, so the audio must be adjusted accordingly before being encoded. Some players will only play NTSC discs, some players will only play PAL discs, and some will play both. Most European players play both. These multi-standard players output NTSC from a 525/60 disc and PAL from a 625/50 disc. This requires two TVs or a multi-standard TV.
The MPEG video on DVD is stored in digital format, but it’s formatted for one of two mutually incompatible television systems: 525/60 (NTSC) or 625/50 (PAL/SECAM). Therefore, there are two kinds of DVDs: “NTSC DVDs” and “PAL DVDs.” Some players only play NTSC discs, others play PAL and NTSC discs. Discs are also coded for different regions of the world (see 1.10). Almost all DVD players sold in PAL countries play both kinds of discs. These multi-standard players partially convert NTSC to a 60-Hz PAL (4.43 NTSC) signal. The player uses the PAL 4.43-MHz color subcarrier encoding format but keeps the 525/60 NTSC scanning rate. Most modern PAL TVs can handle this “pseudo-PAL” signal. A few multi-standard PAL players output true 3.58 NTSC from NTSC discs, which requires an NTSC TV or a multi-standard TV. Some players have a switch to choose 60-Hz PAL or true NTSC output when playing NTSC discs.
The MPEG video on DVD is stored in digital format, but it’s formatted for one of two mutually incompatible television systems: 525/60 (NTSC) or 625/50 (PAL/SECAM). There are three differences between discs intended for playback on different systems: picture size and pixel aspect ratio (720×480 vs. 720×576), display frame rate (29.97 vs. 25), and surround audio options (Dolby Digital vs. MPEG audio). (See 3.4 and 3.6 for details.) Therefore, there are two kinds of DVDs: NTSC DVDs and PAL/SECAM DVDs. Video from film is usually encoded at 24 frames/sec but is preformatted for one of the two display rates. Movies formatted for PAL display are usually sped up by 4% at playback, so the audio must be adjusted accordingly before being encoded. All PAL DVD players can play Dolby Digital audio tracks, but not all NTSC players can play MPEG audio tracks. PAL and SECAM share the same scanning format, so discs are the same for both systems.
