Is it possible to dub messages recorded on a tape recorder or mini disc to my IC recorder ?
Yes. You can dub messages with an optional connecting cable (*1). To dub onto an IC Recorder, connect the microphone jack of the IC Recorder to the earphone jack or the LINE OUT jack of the tape recorder or mini disc unit. Connecting cables • Mini plug (w/ resistance) Mini plug (w/ resistance) • Mini plug w/ resistance) Stereo Mini plug (w/ resistance) Note It is recommended that the microphone sensitivity be set to H while recording. To adjust a recording level, use volume control of the tape recorder or mini disc. If a connecting cable without resistance is used for dubbing messages onto an IC Recorder, there may be a pause in the middle of the recorded sound. Be sure to use a connecting cable with resistance.