My AeroBed is deflating?
If your AeroBed is leaking air, it could be because of one of the following possible reasons: Air is leaking from the Air Release Valve. • If air is leaking from Air Release Valve, carefully remove the round black plastic gasket (or white silicone gasket, depending on model) inside the Air Release Valve cover. • Rinse this gasket in warm water for 10 minutes, then cool and towel dry. • Re-insert gasket in the valve cover, making certain that the side of the gasket with the U-shaped groove faces into the cover. Leave valve in open position for approximately 30 minutes. Then close and proceed with inflation instructions. • If you do still have a valve problem click here to order. Air is leaking from a puncture or tear in the product: • To check for a puncture we recommend that you sponge the bed with luke warm water and mild detergent, then inflate the bed. • Bubbling will start where the puncture is. • If you do have a puncture or tear in your product, click here to order. NOTE: PLEASE