My AVI250 turns off every 5 minutes whenever I try to watch my TV. What is wrong with my receiver?
Nothing! This is a feature. It works like this: When you turn on your TV, your AVI250 will automatically turn on, switch to TV input, and start performing. When you turn your TV off, after 5 minutes the AVI250 will turn off. This is done through the TV Video Input on the AVI250. If you didn”t connect the video wire from the Video Output jack on your TV to the TV Video Input jack on the AVI250, your AVI250 will shut off every five minutes because it does not see a video signal telling it to stay on. Simply connect your Video Output jack on your TV to the TV Video Input jack on the AVI250. If you do not have a Video Output jack on your TV, you can bypass this feature by doing the following (you must do this on the front panel of the AVI250, NOT the remote): 1) Press and hold both the TV and LD buttons. 2) After holding both buttons for approximately 2 seconds, the display will read “TV AT ON.” 3) Quickly let go of both buttons and push the TV button again. The display will read “TV AT O